PANTOPRAZOLE SUSTAINED RELEASE TABLETS: QBD-BASED STATISTICAL DEVELOPMENT AND IN VITRO INVESTIGATIONS

Authors

  • AJAY MALIK Department of Pharmaceutics, Faculty of Pharmacy, IFTM University, Moradabad, Uttar Pradesh, India. https://orcid.org/0009-0004-0830-5404
  • NAVNEET VERMA Department of Pharmaceutics, Faculty of Pharmacy, IFTM University, Moradabad, Uttar Pradesh, India.
  • VIJAY SHARMA Department of Pharmaceutics, Faculty of Pharmacy, IFTM University, Moradabad, Uttar Pradesh, India.

DOI:

https://doi.org/10.22159/ajpcr.2025v18i5.54278

Keywords:

Chitosan, Sodium starch glycolate, Critical quality attributes, Polyelectrolyte complex, Critical material attributes, Pantoprazole sodium

Abstract

Objective: The present study is an attempt to develop and evaluate the sustained release tablet formulations (oral) of pantoprazole sodium utilizing chitosan (CH) based in situ forming polyelectrolyte complex as retardant polymer.

Methods: The traditional method of wet granulation was used to create various formulations employing a 1% w/w solution of CH in 1% acetic acid (cooled to about 4°C and neutralized) as a binder. The formulation was optimized using a two-factor, three-level face-centered Central Composite Design. The Design-Expert software (Stat-Ease 360 trial version, Minneapolis, MN) was employed for further analysis of obtained results. For the study of effect of critical material attributes (CMAs) (independent variables) on Critical Quality Attributes (response variables) multiple liner regression analysis was performed through generation of second-order polynomial models using software. The analysis of variance was utilized for validation of generated models. To establish the interaction and main effects of CMAs software generated contour plots and 3D response surface plots were used. The optimized formulations were assessed for a number of characteristics, including thickness, hardness, uniformity of weight, drug content, friability, and in vitro drug release. The pharmacokinetic parameters were examined using various mathematical models to investigate and elucidate the mechanism of drug release from the various formulations.

Results: The drug release studies confirmed a zero-order sustained release of drug for 12 h. The polyelectrolyte complex formation (in situ) between anionic polymers and CH had been revealed by X-ray diffraction studies of polyelectrolyte complex gels.

Conclusion: The polyelectrolyte complex formed between CH and anionic polymer (sodium starch glycolate) had not only provided a sustained drug release but also prevent the initial burst release of hydrophilic drugs.

Downloads

Download data is not yet available.

References

Pogula M, Nazeer S. Extended release formulation. Int J Pharm Technol. 2010 Dec;2(4):625-84.

Pachare SG, Shirolkar SV, Bhalerao AV. Polyelectrolyte complex as a novel system for controlling drug release. Res J Pharm Technol. 2011 Jan;4(1):113-20.

Lal N, Dubey J, Gaur P, Verma N, Verma A. Chitosan based in situ forming polyelectrolyte complexes: A potential sustained drug delivery polymeric carrier for high dose drugs. Mater Sci Eng C Mater Biol Appl. 2017;79:491-8. doi: 10.1016/j.msec.2017.05.051, PMID 28629045

Saleem MA, Kulkurni RV, Noornadim GP. Formulation and evaluation of chitosan based polyelectrolyte complex hydrogels for extended release of metoprolol tartrate. Res J Pharm Technol. 2011 Dec;4(12):1844-51.

Verma A, Bansal AK, Ghosh A, Pandit JK. Low molecular mass chitosan as carrier for hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride. Acta Pharm. 2012;62(2):237- 50. doi: 10.2478/v10007-012-0013-2, PMID 22750821

Sharma V, Singh L, Verma N. QbD enabled process variable study to develop sustained release chitosan-alginate embedded delivery system for improved patient compliance. Braz J Pharm Sci. 2022;58:e19803. doi: 10.1590/s2175-97902021000319803

Arora D, Khurana B, Nanda S. Statistical development and in-vivo evaluation of resveratrol-loaded topical gel containing deformable vesicles for significant reduction in photoinduced skin aging and oxidative stress. Drug Dev Ind Pharm. 2020;46(11):1898-910. doi: 10.1080/03639045.2020.1826507, PMID 32962434

Sharma V, Singh L, Verma N. Establishment and escalation of an amino acid stacked repressible release embedded system using quality by design. Turk J Pharm Sci. 2019;16(1):20-6. doi: 10.4274/tjps.44154, PMID 32454690

Ibrahim MS, Elmahdy Elsayyad NM, Salama A, Noshi SH. Quality by Design (QbD) as a tool for the optimization of indomethacin freeze-dried sublingual tablets: In vitro and in vivo evaluation. Int J Appl Pharm. 2021;13(5):160-71. doi: 10.22159/ijap.2021v13i5.42216

Indian Pharmacopoeia 2018. Government of India, Ministry of Health and Family Welfare. Ghaziabad: Indian Pharmacopoeia Commission; 2018.

Siddarth B, Sudheer Babu I. Analytical Method Development and method validation for the estimation of pantoprazole in tablet dosage form by RP-HPLC. Pharm Chem. 2013;5(4):99-104.

Rahić O, Vranić E, Mujezin I, Hadžiabdić J, Elezović A. Development and validation of HPLC method for determination of pantoprazole in pantoprazole pellets. Int J Pharm Teach Pract. 2013;4(4):793-6.

Battu PR. Simultaneous HPLC estimation of pantoprazole and domperidone from tablets. Int J ChemTech Res. 2009;1(2):275-7.

Dey S, Samal HB, Kumar D, Priyanka Y, Choudhary A, Sahoo SK, et al. RP-HPLC method for the estimation of pantoprazole sodium in bulk and in dosage forms. Int J Chem Anal Sci. 2011;2:34-6.

Shah Dhiren P, Jain VC, Sonani Nitesh G, Dalvadi Hitesh P, Dhimmar HD. A novel co-processed super disintegrating agent consisting of crosspovidone and sodium starch glycolate. Res J Pharm Technol. 2011 Feb;4(2):290-3.

Mondal S, Abuzar S, Islam A, Islam T, Rahman S. Sustain release formulation and evaluation of ciprofloxacin sustain release tablet and its comparison with market product. Int J Life Sci Rev. 2015;1(4):124-36.

Abbas G, Hanif M, Khan MA. pH responsive alginate polymeric rafts for controlled drug release by using box Behnken response surface design. Des Monomers Polym. 2017;20(1):1-9. doi: 10.1080/15685551.2016.1231046

Gonzalez D, Golab JT, Kaduk JA, Gindhart AM, Blanton TN. Crystal structure of pantoprazole sodium sesquihydrate Form I, C16H14F2N3O4SNa(H2O)1.5. Powder Diffr. 2020;35(1):53-60. doi: 10.1017/S0885715620000019

Jain S, Yadav SK, Patil UK. Preparation and evaluation of sustained release matrix tablet of furosemide using natural polymers. Res J Pharm Technol. 2008 Oct-Dec;1(4):374-6.

Wilson B, Babubhai PP, Sajeev MS, Jenita JL, Priyadarshini SR. Sustained release enteric coated tablets of pantoprazole: formulation, in vitro and in vivo evaluation. Acta Pharm. 2013;63(1):131-40. doi: 10.2478/acph-2013-0002, PMID 23482318

Saruchi KV. Enzymatically synthesized pH-responsive IPN for in-situ release of pantoprazole sodium. Int J Pharm Pharm Sci. 2019;11(4):98- 103.

Chakraborty S, Sarkar S, Debnath SK. Formulation development and evaluation of pantoprazole enteric coated tablets. Int J ChemTech Res. 2009;1(3):663-6.

Solunke RS, Khade GA, Krishnmurthy DM, Deshmukh MT, Shete RV, Kore KJ. Development and evaluation of pantoprazole sodium floating gel. Res J Pharm Technol. 2020;13(2):682-6. doi: 10.5958/0974- 360X.2020.00131.6

Soni S, Ram V, Verma A. Updates on approaches to increase the residence time of drug in the stomach for site specific delivery: brief review. Int Curr Pharm J. 2018;6(11):81-91. doi: 10.3329/icpj. v6i11.36436

The United States Pharmacopoeia 32 National Formulary 27. Rockville, MD: United States Pharmacopoeia Convention. Inc.; 2009.

Skelly JP, Amidon GL, Barr WH, Benet LZ, Carter JE, Robinson JR, et al. In vitro and in vivo testing and correlation for oral controlled/ modified-release dosage forms. Pharm Res. 1990;7(9):975-82. doi: 10.1023/A:1015970512368

Kharwade R, Nair H, Masurkar D, Pise A, More S, Pise S. Formulation and evaluation of chronomodulated pulsatile drug delivery system for nocturnal hyperacidity. Res J Pharm Technol. 2022;15(4):1449. doi: 10.52711/0974-360X.2022.00240

Costa P, Sousa Lobo JM. Modeling and comparison of dissolution profiles-review. Eur J Pharm Sci. 2001;13(2):123-33. doi: 10.1016/ s0928-0987(01)00095-1, PMID 11297896

Badwan AA, Nabulsi L, Al-Omari M, Daraghme NH, Ashour MK. Pantoprazole Sodium File. Jordan: Jordanian Pharmaceutical Manufacturing Company; ???.

Socrates G. Infrared Characteristic Group Frequencies. New York: JohnWiley & Sons; 2004.

Dani VR. Organic Spectroscopy. New Delhi: Tata McGraw-Hill Publishing Company Limited; 1995. p. 86-168.

Leonida M, Ispas-Szabo P, Mateescu MA. Self-stabilized chitosan and its complexes with carboxymethyl starch as excipients in drug delivery. Bioact Mater. 2018;3(3):334-40. doi: 10.1016/j.bioactmat.2018.04.001, PMID 29988516

Al-Jbour ND, Beg MD, Gimbun J, Alam AK. Preparation and characterization of low molecular weight chitosan with different degrees of deacetylation by the acid hydrolysis method. Int J Appl Pharm. 2021;13(2):153-64. doi: 10.22159/ijap.2021v13i2.32229

Hingmire LP, Deshmukh VN, Sakarkar DM. Development and evaluation of sustained release matrix tablets using natural polymer as release modifier. Res J Pharm Technol. 2008;1(3):193-6.

Vadamala PR, Saravanakumar K, Baiah Y. Formulation design and characterization of orally disintegrating tablet of rizatriptan using different super disintegrants. Ymer. 2022;21(11):1181-91.

Mohire NC, Yadav AV, Gaikwad VK. Novel approaches in development of metronidazole orodispersible tablets. Res J Pharm Technol. 2009 Apr-Jun;2(2):283-6.

Dhawadi PP, Jagtap RN. Characterization of the glass transition temperature of chitosan and its oligomers by temperature modulated differential scanning calorimetry. Pelagia Res Library. 2012;13(3):1372- 82.

Rao MR, Bachhav DG, Rode RB, Nikam KR, Pathade ND. Compatibility study of aceclofenac and tablet disintegrants by thermal and nonthermal methods. Res J Pharm Technol. 2011 Mar;4(3):423-7.

Dong Y, Ruan Y, Wang H, Zhao Y, Bi D. Studies on glass transition teperature of chitosan with four techniques. J Appl Polym Sci. 2004;3:1553-8.

Mahmoud ZH, Hamrouni A, Kareem AB, Mostafa MA, Jalil Alhakim ZJ, Majeed AH. Synthesis and characterization of chitosan sheet modified by varied weight ratio of anatase (TiO2) nano mixture with Cr(VI) adsorbing. Kuwait J Sci. 2023;50(3):290-9. doi: 10.1016/j. kjs.2023.05.006

Kumar S, Koh J. Physiochemical, optical and biological activity of chitosan-chromone derivative for biomedical applications. Int J Mol Sci. 2012 May;13(5):6102-16. doi: 10.3390/ijms13056102, PMID 22754352

Bhandari PN, Jones DD, Hanna MA. Characterization of sodium starch glycolate prepared using reactive extrusion and its comparisons with a commercial brand VIVASTAR®P. Ind Crops. Prod. 2013;41:324-30.

Chaulang G, Patel P, Hardikar S, Kelkar M, Bhosale A, Bhise S. Formulation and evaluation of solid dispersions of furosemide in sodium starch glycolate. Trop J Pharm Res. 2009 Feb;8(1):43-51. doi: 10.4314/tjpr.v8i1.14711

Jangde R, Singh D. Compatibility studies of quercetin with pharmaceutical excipients used in the development of novel formulation. Res J Pharm Technol. 2014 Oct;7(10):1101-5.

Comoglu T, Gonul N, Dogan A, Basci N. Development and in-vitro evaluation of pantoprazole loaded microspheres. Drug Deliv. 2008;15(5):295-302. doi: 10.1080/10717540802006864, PMID 18763160

Uddin A, Islam A, Uddin R, Sultana J, Chowdhury F, Ferdushi R. Dissolution study of tramadol HCl sustained release matrix tablet from HPMC K4M. World J Pharm Res. 2015;4(12):1447-59.

Published

07-05-2025

How to Cite

AJAY MALIK, et al. “PANTOPRAZOLE SUSTAINED RELEASE TABLETS: QBD-BASED STATISTICAL DEVELOPMENT AND IN VITRO INVESTIGATIONS”. Asian Journal of Pharmaceutical and Clinical Research, vol. 18, no. 5, May 2025, pp. 61-70, doi:10.22159/ajpcr.2025v18i5.54278.

Issue

Section

Original Article(s)