INFLUENCE OF DESIGN ON THE ADAPTABILITY OF BUILDINGS: A CASE OF THE CITY OF NAIROBI, KENYA
DOI:
https://doi.org/10.22159/ijss.2025v13i3.53571Keywords:
Adaptability, Redundancy, Upgradability, Adjustability, ObsolescenceAbstract
This study investigated the design and adaptability of civic buildings considering the challenge of static architecture and resultant building obsolescence occasioned by human and environmentally induced change. Static architecture escalates the life-cycle environmental impacts resulting from increased resource consumption, building material production, and demolition wastes. Contemporary sustainability standards emphasize energy-efficient structures and updating existing building stocks. The study explored the concepts of building adaptation, layers that conceptualize the building and link time and material form, adaptability for sustainability, design for disassembly, and obsolescence. Examined here too were the strategies on spatial organization, structural configuration, redundancy, upgradability of building services, and adjustability of the building envelope, that optimize building adaptability. Case studies were probed using environmental behavior research methods of observation and tracing effects of after-use with pre-coded checklists to determine how the original design had affected the adaptability of the buildings over time. Other buildings were reviewed through library research and analysis of archival information. Respondent opinions on fundamental aspects of building design, building use adaptability, and its relationship to design were obtained using structured interview guides. This research demonstrated that design choices on spatial organization (loose fit spaces or multifunctional spaces, structural configuration, building services, and envelope) influenced adaptability of buildings.
References
Aytac, D. O., Arslan, T. V., & Durak, S. (2016). Adaptive reuse as a strategy towards urban resilience. European Journal of Sustainable Development, 5(4), 523-532.
Blackwell, B. (2024). Building knowledge: Constructing technoscientific infrastructures. Taylor and Francis Online Journal, 28(2), 290-309.
Blakstad, S. H. (2001). A Strategic approach to adaptability in office buildings. Trondheim: Doktor Ingeniør Thesis, Norwegian University of Science and Technology Faculty of Architecture, Planning and Fine Arts Department of Building Technology.
Boyd, D., & Jankovic, L. (1992). The limits of intelligent office refurbishment. Property Management, 11(2), 102-113.
Brand, S. (2022). How buildings learn: What happens after they’re built. New York: Penguin.
Burns, N., Grove, S.K. 1997 The Practice of Nursing Research: Conduct, Critique and Utilisation, 3rd Edition. Philadelphia: W.B. Saunders.
Cheng, Jeffrey Y. C., Wong, Nancy C.Y., Ho, Tony W.L., Kwong, Hiu Fai; Ng, Roger T. H., and Cheung, Howard. 2021. A case study of lighting retrofit to improve building energy efficiency and lighting quality by using luminaires with nano optical coating. HKIE Transactions, January 2021, DOI: https://doi.org/10.33430/V27N4THIE-2020-0008 .
Ching F.D.K. (2014). Architecture: Form, space and order. Hoboken, New Jersey: John Wiley and Sons, Inc.
Ching, F. D. K. (2021). Architecture: Form, space, and order (5th ed). New Jersey: Wiley and Sons.
Ching, F. D. K., & Adams, C. (2021). Architecture: Form, space, and order (5th ed). New York: Wiley.
Conejos, S., Langston, C., & Smith, J. (2011). Improving the implementation of adaptive reuse strategies for historic buildings. In: Le Vie dei Mercanti S.A.V.E. HERITAGE: Safeguard of architectural, visual, environmental heritage. Naples, Italy: Aversa and Capri.
Conejos, S., Langston, C., & Smith, J. (2013). AdaptSTAR model: A climate-friendly strategy to promote built environment sustainability. Habitat International, 37(1), 95-103.
Douglas, J. (2006). Building adaptation. UK: Elsevier Ltd. Fournier.
Duffy, F. (1990). Measuring building performance. Facilities, 8(5), 17.
Ellison, L. and Sayce, S. 2007. Assessing sustainability in the existing commercial property stock: establishing sustainability criteria relevant for the commercial property investment sector. Property Management, Vol. 25 No. 3, pp. 287-304.
Estaji, H. (2017). A review of flexibility and adaptability in housing design. International Journal of Contemporary Architecture, 4(2), 37-49.
Fava, F. (2024). Ongoing adaptive reuse: Patterns of heritage resilience before and after COVID-19. Journal of Cultural Heritage Management and Sustainable Development, 14, 538-554.
Finch, Edward, 2009. Built Environment, Porto Alegre, v. 9, n. 2, p. 7-15, Apr./Jun. 2009. ISSN 1678-8621 © 2005, National Association of Built Environment Technology. 7. [Ambiente Construído, Porto Alegre, v. 9, n. 2, p. 7-15, abr./jun. 2009. ISSN 1678-8621 © 2005, Associação Nacional de Tecnologia do Ambiente Construído.7].
Fournier, D. F., & Zimnicki, K. (2004). Integrating sustainable design principles into the adaptive reuse of historical properties. Champaign, IL: Construction Engineering Research Laboratory.
Friedman, A. (2002). Planning the new suburbia: Flexibility by design. Vancouver: UBC Press.
Friedman, A. (2002). The adaptable house: Designing homes for change. International Journal of Heritage Studies, 22(6), 466-481.
Fuster, A., Gibb, A., Austin, S., Beadle, K. and Madden, P. (2009), “Adaptable buildings: three non-residential case studies”, in Wamelink, M. (Ed.), CIB Changing Roles: New Roles; New Challenges Conference, CIB, Noordwijk.
Gan, Vincent J.L.; Chan, C.M.; Cheng, Jack C.P., Lo, Irene M.C. 2019. A comprehensive approach to mitigation of embodied carbon in reinforced concrete buildings. Journal of Cleaner Production. Elsevier
Vol. 229. Pp. 582-597.https://doi.org/10.1016/j.jclepro.2019.05.035 .
Gan, Vincent J.L.; Chan, C.M.; Tse, K.T.; Lo, Irene M.C., and Cheng, Jack C.P. 2017. A comparative analysis of embodied carbon in high-rise buildings regarding different design parameters. Journal of Cleaner Production, Elsevier. Vol. 161. Pp., 663-675. https://doi.org/10.1016/j. jclepro.2017.05.156 .
Gardner, R. (1993). The opportunities and challenges posed by refurbishment. Sydney: Building Science Forum of Australia.
Geraedts, R. P. (2008). Design for change: Flexibility key performance indicators. Loughborough: I3CON Conference.
Geraedts, R., Remoy, H., Rijn, E. V., & Van Rijn, E. (2014). Adaptive capacity of buildings, a determination method to promote flexible and sustainable construction. Durban, SA: International Union of Architects World Congress UIA.
Gillian, A., Sara, W., & Elizelle, J. C. (2023). A framework for sustainable adaptive reuse: Understanding vacancy and underuse in existing urban buildings. Frontiers in Sustainable Cities, 5, 985656.
Gorse, C., & Highfield, D. (2009). Refurbishment and upgrading of buildings. United Kingdom: Spon Press.
Gosling, J., Naim, M., Sassi, P., Iosif, L., & Lark, R. (2008). Flexible buildings for an adaptable and sustainable future (pp. 115-124). Cardiff, UK: Association of Researchers in Construction Management.
Hui, S. C. M., and Cheng, K. K. Y., 2008. Analysis of effective lighting systems for university classrooms, In Proceedings of the Henan-Hong Kong Joint Symposium 2008, 30 Jun-1 July 2008, Zhengzhou, China, pp. 53-64.
Jacobs, J., 1993. The death and life of great American cities. Vintage Books.
Jones, L. (2008). Environmentally responsible design: Green and sustainable design for interior designers. Hoboken, New Jersey: John Wiley and Sons, Inc.
Karlen, M. (2009) Space planning basics. Hoboken, New Jersey: John Wiley and Sons, Inc.
Kincaid, D. (2002). Adapting buildings for changing uses. In: Guidelines for change of use refurbishment (p. 4). London: Taylor and Francis Group.
Langston, C. (2013). The role of coordinate-based decision-making in the evaluation of sustainable built environments. Construction Management and Economics, 31(1), 62-77.
Langston, C., & Shen, L. Y. (2007). Application of the adaptive reuse potential model in Hong Kong: A case study of Lui Seng Chun. The International Journal of Strategic Property Management, 11(4), 193- 207.
Langston, C., & Smith, J. (2010). Making better decisions about built assets. In: Building a better world: CIB world congress 2010. Salford Quays, United Kingdom: The Lowry.
Langston, C., Wong, F., Hui, E., & Shen, L. Y. (2008). Strategic assessment of building adaptive reuse opportunities in Hong Kong. Building and Environment, 43(10), 1709-1718.
Langston, C., Yung, E., & Chan, E. (2013). The application of ARP modelling to adaptive reuse projects in Hong Kong. Habitat International, 40(4), 233-243.
Lehmann, S. (2012). Sustainable building design and systems integration: Combining energy efficiency with material efficiency. In S. Lehmann, & R. Crocker (Eds.), Designing for zero waste: Consumption, technologies and the built environment (pp. 209-246). New York: Earthscan.
Manewa, A., Pasquire, C., Gibb, A., Ross, A., & Siriwardena, M. (2013). Adaptable buildings: Striving towards a sustainable future. Melbourne, Australia: Global Cities Research Institute, RMIT University.
Millais, M. (1997). Building structure: A conceptual approach (1st ed.). London: E & FN Spoon Ltd.
Mohammad, B. H., Tuuli, J., Hilde, R., & Vincent, G. (2023). Circular building adaptability and its determinants – A literature review. International Journal of Building Pathology and Adaptation, 41(6), 47-69.
Nageim, H., Durka, F., Morgan, W., & Williams, D. T. (2010). Structural mechanics: Loads, analysis, materials and design of structural elements (7th ed.). London: Pearson Education.
Njuguna, M. M. (2024). Influence of design on the adaptability of buildings: A case of the city of Nairobi, Kenya. Unpublished Thesis, Department of Architecture and Interior Design, School of Engineering and Architecture, Kenyatta University.
Rand, A., Bragança, L., & Gervásio, H. (2021). Adaptability of buildings: A critical review on the concept evolution. Applied Sciences, 11, 4483.
Schmidt, R., Kelly, G., Dainty, A., & Story, V. (2011). Improving the design of adaptable buildings through effective feedback in use. Amsterdam, Netherlands: Loughborough University.
Takva, Y., Takva, Ç., & İlerisoy, Z. Y. (2023). Sustainable adaptive reuse strategy evaluation for cultural heritage buildings. International Journal of Built Environment and Sustainability, 10, 25-37.
TEC. (2008). Commercial property and climate change - exposures and opportunities (Existing Building Project). Australia: Total Environment Centre Inc.
Tobias, L., & Vavaroutsos, G. (2009). Retrofitting office buildings to be green and energy-efficient: Optimizing building performance, tenant satisfaction and financial return. Washington, DC: Urban Land Institute.
Tobolczyk, M. (2021). Contemporary architecture. Tyne, England: Cambridge Scholars Publishing.
United Nations Environment Programme (2007) UNEP 2007 Annual Report. United Nations Environment Programme, Nairobi.
Watts, A. (2005). Modern construction: Facades (1st ed). Vienna: Springer.
World Economic Forum. (2024). Adaptive reuse of assets model policy (Policy paper). Switzerland: World Economic Forum.
Yudelson, J. (2010). Greening existing buildings. USA: McGraw Hill Companies, Inc.
Published
How to Cite
Issue
Section
Copyright (c) 2025 Loise Kitulu
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
